润滑脂及润滑油的定量涂覆
德派智能解决方案

不同的零件之间摩擦可能会导致这些元件损坏,使用润滑剂可有效防止摩擦。但需要根据不同的应用要求选择润滑剂。例如,有些润滑脂仅用于潮湿环境,而有些用于极端温度。高度灵活的定量和操作设置有助于表面、边缘或定点涂覆低粘度到高粘度材料。由于与材料供应商密切合作,可不断优化润滑和注油过程,并针对客户需求提供定制化解决方案。
润滑脂的定量涂覆
不论是需要润滑齿轮、座椅头枕、门锁还是车轮轴承—德派均可提供满足不同需求的解决方案。可以将润滑脂定量输出且涂覆到零件的指定位置上。润滑脂通常放置于容量为1-1,000 l的料桶中,德派可以根据不同料桶的容量提供合适的泵和涂胶系统,德派可提供理想的泵和计量系统,从而将润滑脂从原料桶中直接输送到指定涂胶位置。根据不同要求,可手动或自动点胶或连续涂胶。如果在生产过程中必须确保一致性的输出,则通常选择自动涂胶。
润滑油的定量涂覆
德派定量涂胶系统可以将润滑油从原料桶中直接抽出,并涂覆到指定位置,如电机、齿轮箱等等,德派定量涂胶注油系统可以处理低至高粘度的不同材料,并且应用于众多行业,如汽车、汽车零配件供应商、航空航天业和轴承制造业。如果采用低粘度材料,可选择低压驱动系统;中或高粘度材料,则通过高压柱塞泵驱动。有手动或自动系统可选。
很高兴为您服务
产品概览
-
Light barrier
Light barrierThe light barrier is used with shot and high-speed valves to monitor the number of discharged shots.
-
Metering control unit
Metering control unitThe control unit has been designed for the monitoring and control of complex metering processes. It simplifies metering by enabling users to store and recall various programmes.
-
Pressure sensors
Pressure sensorsPressure sensors for the monitoring of material pressure in complex dispensing processes using shot or spray valves.
-
Pressure Tanks
Pressure TanksFor effortless and clean feeding of low viscosity media such as paint, oils and preservatives. -
Spray Guns
Spray GunsThe spray gun is our solution to manual full-surface application of greases and oils. -
Stroke detection
Stroke detectionThe stroke detection device reliably monitors the correct activity in various dispensing and metering valve types.
-
Transfer Pumps
Transfer PumpsTransfer pumps are used for material feeding directly from the original containers. -